Note: All Island Packet models are subject to specification changes (dimensions, capacities, ratings, equipment, etc.) during their production life. The specifications given here are representative and should be used for general comparison only.
General Information For The IP32
Island Packet 32
All the proven attributes that have earned IPY an international reputation for excellence in cruising yacht design and quality are embodied in the Island Packet 32 : spirited performance, exceptional seakeeping, inherent safety, ease of handling, and livability and detail refinement that have become industry benchmarks. Combined with classic good looks, exacting craftsmanship, and reliability and trouble-free service second to none, the IP32 is an unequaled choice for the knowledgeable cruising sailor.
- from the factory brochure
Documentation For The IP32
Brochure
Spec & Price List
Interior Plan
Specifications For The IP32
First Built
1990
LOA
35'
Sail Area
654
Last Built
1996
LOD
32'-5''
Sail I
41'-5''
Number Built
120
LWL
28'-7''
Sail J
16'-0''
Displacement
12900
Beam
11'-6''
Sail P
34'-4''
Ballast
5950
Draft
4'-4''
Sail E
13'-0''
Fuel Cap
28 US gal
Shoal Draft
3'-6''
D/L Ratio
247
Water Cap
85 US gal
Mast Height
45'
SA/D Ratio
19.0
Holding Cap
15 US gal
Diesel HP
27
B/D Ratio
46%
Click here to compare these IP32 specifications with other Island Packet models.
Running Rigging For The IP32
Mainsail Rigging
Staysail Rigging
Other Rigging
Halyard
3/8''x105' LS
Halyard
5/16''x70' LS
Jib Halyard
3/8''x90' LS
Sheet
7/16''x56' Trophy
Sheet
3/8''x66' Trophy
Jib Sheet
7/16''x130' Trophy
Topping Tail
5/16''x30' LS
Clew
3/8''x60'
Boom Vang
7/16''x40' Trophy
Topping Wire
1/8''x32' 7x7 wire
Topping Lift
1/4''x50' LS
Reefing Lines
- -
Traveler Control
3/8''x30' LS
Click here to compare IP32 running rigging with other Island Packet models.
Standing Rigging For The IP32
Wire Size
Loos Gauge
Scale Reading Below 50 F
Scale Reading 50 F to 80 F
Scale Reading Above 80 F
Upper Stays
9/32''
PT-3
16
18
19
Intermediate Stays
- -
- -
- -
- -
- -
Aft Lower Stays
1/4''
PT-2
32
34
35
Fwd Lower Stays
1/4''
PT-2
32
34
35
Check Stays
- -
- -
- -
- -
- -
Back Stays
7/32''
PT-2
28
30
31
IMPORTANT : These are MAXIMUM (not to exceed) rigging tensions as measured using the indicated Loos gauges
Check tensions after initial setup of the rigging and after any subsequent adjustments.
Gauge readings may vary from stay to stay of the same type but none should exceed the maximum scale readings listed.
Please visit the Loos website for more information about the PT-2 and PT-3 gauges.
If you are not familiar with the process for tuning your rig please contact a qualified rigger in your area.
This Website Is Not Affiliated With Nor Operated By Island Packet and Seaward Yachts, LLC
---------------------------
All Trademarks And Copyrights Remain The Property Of Their Respective Owners
---------------------------
Your Usage Of This Website Signifies Your Acceptance Of The Terms Of Use
---------------------------
