Note: All Island Packet models are subject to specification changes (dimensions, capacities, ratings, equipment, etc.) during their production life. The specifications given here are representative and should be used for general comparison only.
General Information For The IP37
Island Packet 37
The Island Packet 37 offers the sparkling performance, superior safety and seakeeping, ease of handling and spacious and liveable accommodations that have made Island Packet Yachts an industry benchmark for high quality cruising yachts. The IP37 continues Island Packet's industry leadership in design and construction excellence and attention to detail. Every aspect of this yacht, from masthead to keel, has been carefully scrutinized to maximize the enjoyment of cruising.
- from the factory brochure
Documentation For The IP37
Brochure
Spec & Price List
Interior Plan
Specifications For The IP37
First Built
1994
LOA
38'-5''
Sail Area
800
Last Built
1998
LOD
36'-5''
Sail I
45'-10''
Number Built
60
LWL
31'
Sail J
16'-8''
Displacement
18500
Beam
12'-2''
Sail P
39'-0''
Ballast
8200
Draft
4'-6''
Sail E
14'-6''
Fuel Cap
50 US gal
Shoal Draft
3'-8
D/L Ratio
277
Water Cap
90 US gal
Mast Height
49'-6''
SA/D Ratio
18.3
Holding Cap
18 US gal
Diesel HP
38
B/D Ratio
44%
Click here to compare these IP37 specifications with other Island Packet models.
Running Rigging For The IP37
Mainsail Rigging
Staysail Rigging
Other Rigging
Halyard
7/16''x107'
Halyard
3/8''x66'
Jib Halyard
7/16''x96'
Sheet
1/2''x56'
Sheet
7/16''x70'
Jib Sheet
1/2''x155'
Topping Tail
5/16''x32'
Clew
3/8''x65'
Boom Vang
1/2''x41'
Topping Wire
1/8''x37' 7x7 wire
Topping Lift
5/16''x50'
Reefing Lines
1/2''
Traveler Control
3/8''x30'
Click here to compare IP37 running rigging with other Island Packet models.
Standing Rigging For The IP37
Wire Size
Loos Gauge
Scale Reading Below 50 F
Scale Reading 50 F to 80 F
Scale Reading Above 80 F
Upper Stays
5/16''
PT-3
23
25
26
Intermediate Stays
- -
- -
- -
- -
- -
Aft Lower Stays
9/32''
PT-3
16
18
19
Fwd Lower Stays
9/32''
PT-3
16
18
19
Check Stays
- -
- -
- -
- -
- -
Back Stays
1/4''
PT-2
34
36
37
IMPORTANT : These are MAXIMUM (not to exceed) rigging tensions as measured using the indicated Loos gauges
Check tensions after initial setup of the rigging and after any subsequent adjustments.
Gauge readings may vary from stay to stay of the same type but none should exceed the maximum scale readings listed.
Please visit the Loos website for more information about the PT-2 and PT-3 gauges.
If you are not familiar with the process for tuning your rig please contact a qualified rigger in your area.
This Website Is Not Affiliated With Nor Operated By Island Packet and Seaward Yachts, LLC
---------------------------
All Trademarks And Copyrights Remain The Property Of Their Respective Owners
---------------------------
Your Usage Of This Website Signifies Your Acceptance Of The Terms Of Use
---------------------------
